Roles and permissions

Compare the five built-in roles, and make roles of your own with the permissions each job needs, on All sites, chosen Sites or chosen cameras.

Content updated Applies to version 3.0.1 Print view kalytera-cloud administration roles read-only custom-roles permissions
Contents

What a person can do in your portal comes from their roles: one main role, and any roles of your own they hold beside it. Administrators give roles under Settings > People & access, as described in People and access. Each role says where it applies; an administrator always works on All sites.

Built-in roles

The five built-in roles cannot be changed or deleted, and they apply on All sites. For other permissions, or only some Sites or cameras, give the person one of your own roles.

RoleFor
AdministratorEverything in the portal, including people and their roles, with every permission below.
SupervisorEverything an Operator does, and seeing the settings, Sites, cameras, people and evidence holds without changing them.
OperatorWatching video, handling alarms, running response procedures, and working with exports and investigation cases.
ViewerWatching live and recorded video and seeing alarms and Insights, without acting on them.
Read-onlySeeing every section the portal shows it, without changing, operating, sharing or downloading anything.

Permissions only your roles give

Of the built-in roles, only Administrator has the permissions below. To let an Operator or Supervisor use one, give them a role of your own that has it, beside their main role. Extra permissions held per person before are now roles of your own at the same Sites.

Administrators have every permission with their role. Give each person only the access their work requires.

PermissionWhat it allows
Manage evidence holdsPreserving evidence, reviewing holds and requesting their release.
Reopen resolved alarms and incidentsReturning resolved alarms and incidents to review, with a reason.
Email alarms to other addressesSending an alarm to an address that is not a person in the portal.
Operate Site outputsSwitching a Site's outputs, playing speaker clips and moving a PTZ camera from its Monitor tile; with See Sites, a panel zone's Test alarm.
Talk through Site speakersTalking through a Site speaker or a camera's speaker. Needs Operate Site outputs too.
Configure Site control devicesSetting up control devices and Cloud arming.
Arm SitesControlling manual Cloud arming groups and panel areas, and unbypassing a panel zone.
Disarm SitesDisarming a Cloud group or panel area, or bypassing a panel zone. Needs Arm Sites too.
Force-arm SitesArming although some sources are active or faulty. Needs Arm Sites too.
Bypass arming sourcesLeaving one source out of a group for a set time or until the next disarm. Needs Arm Sites too.

For the site controls, see Cloud arming and site controls.

Roles of your own

Select Roles on People & access. Built-in roles lists the five protected roles, and Your roles your portal's own, up to 100, each with where it applies.

  1. Select New role, or Copy beside a role to start from its permissions.
  2. Under About this role, enter a Name, optionally a Description, and choose Where this role applies.
  3. Under What this role allows, open each section, folded to one line with a count, and tick what it lets a person see, change, operate, and share or export.
  4. Select Save. If a permission needs its section's view, the editor ticks that view: review the role and save again.

Give the role on a person's Manage page, or when you invite them. Where it applies, its permissions add to their main role, and a person can hold up to 16 of your roles. Managing people and roles stays with the Administrator role; the video link policy and revoking links need Change video link settings on all Sites.

Where a role applies

  • All sites, including new ones: every Site and camera, now and later.
  • Only these Sites: everything at the chosen Sites. Settings and other permissions that change the whole portal show All sites only and grant nothing in such a role; See What's new still counts.
  • Chosen cameras: cameras picked by Site. Such a role grants only live video, the camera list, the mobile app, and those cameras' recordings, bookmarks and exports; every other permission but See What's new shows Needs a Site.

A chosen camera counts while it stays at the Site it was chosen at. What it recorded there stays with the role wherever it goes, but nothing it records at another Site, and after a move the role no longer shows it live. Moving such a camera first asks you to confirm, with Move it. The role editor then marks the camera as moved and offers to follow it to its new Site.

Before you save a change to a role that people hold, the editor lists them and what they gain and lose. Confirm with the button that counts them, such as Save for 2 people. They are signed out within about two minutes and sign in again with the new access.

Delete appears only for a role nobody holds. Supervisors and Read-only people can open your roles to read them, without New role, Copy or Delete.