Kalytera Cloud 3.0: an AI check that holds back alarms with no one in view, and RTSP access for other software
Before 3.1 came Kalytera Cloud 3.0 and its updates. The AI check holds back alarms when no one is in view, other software can open your cameras over RTSP, and you choose the codes each alarm receiving center gets.
We released Kalytera Cloud 3.0 and six updates to it before Kalytera Cloud 3.1, and we did not write about them here. This is what they brought. All of it is in Kalytera Cloud today.
The AI check holds back alarms when no one is in view
With the AI verification add-on and the AI check set to Filter, a burglary alarm from a panel zone, a camera email or a wired input waits for the check before it reaches the alarm receiving center, when all of its cameras can be checked. If the check sees a person or a vehicle on any of them, the alarm goes at once. If it checks every camera and sees no one, the alarm is filtered; since 3.1 the center still receives it, marked AI filtered.
While an alarm waits, the Alarms page shows it first, as Checking with AI, with Send now in its details. Minimum confidence sets how sure the check must be, from 20% to 80%. Email, outputs, webhooks, video links and the alarm's other notifications are never delayed, and 24-hour inputs and wiring faults are never held.
Cameras for other software, and cameras that connect on their own
With the RTSP access add-on, a site can let its users open its cameras over RTSP, from a recorder or another VMS, with their own Kalytera Cloud email and password. Each person gets only the cameras they can watch live. RTSP access stays off on a site until you turn it on.
Where your plan includes them, Hikvision ISUP and Dahua AutoReg devices that connect on their own are listed under Devices calling in, ready to enroll, and only your portal sees them.
Moving cameras and talking through them
With the Site I/O control add-on, a Monitor tile has Camera controls. People who handle alarms and operate the site's outputs can hold a button to pan, tilt, zoom or go to a preset on an Axis camera connected through the Bridge Agent; talking through the camera's speaker also needs permission to talk through the site's speakers. Only one person can move a camera at a time.
For alarm receiving centers
Event codes shows, for all your sites, the SIA code of each event Kalytera Cloud sends to a center, and whether it is sent. With the Image integrity add-on, image faults, such as a blocked view or a moved camera, can go to the center too, each with its restore; they stay off until you turn them on. A video link can also open inside the center's own console, where it shows only the video.
Day to day
- A privacy mask set to Also in video covers its area in live video, playback, floor plans, alarm clips and video links; exports and downloaded clips stay unmasked.
- Add shown alarms to case… puts every alarm the filters show into one case.
- Acknowledge all and Resolve all… handle every open alarm the list shows, after a confirmation with the count, for people with that permission (by default, administrators).
- A camera that loses its video several times in a short time raises one Video unstable alarm, once you switch the rule on.
- A role can apply to chosen cameras instead of whole sites.
See what Kalytera Cloud does, or request a Cloud pilot on a few of your own cameras.