Observe or filter
In Observe mode the result and its frames show under the alarm's evidence and nothing is held. In Filter mode the alarm waits for the check.
Kalytera Cloud · for alarm receiving centers
Send patrols to burglars, not to cats.
Kalytera Cloud sits between your subscribers' cameras and your receiver. The alarm reaches you over SIA DC-09, as it always has. Sent encrypted, it carries a link to its video, and your operator decides in seconds instead of phone calls.
The same alarm, twice
What your queue shows today. And with the video.
Today: everything the center knows
03:12:07 Alarm · Zone 4 · North gate
Wind? A spider? Him?
With Kalytera Cloud: the same alarm, with its video
03:12:07 Alarm · Zone 4 · North gate Video link
One click. A man with a bag at the north gate.
The same SIA DC-09 your center has used for years, encrypted. Nothing to install there. The link opens in a browser.
Verify
One click. No phone call.
- It travels with the alarm, on encrypted SIA DC-09.
- It shows the seconds before the alarm, the seconds after, and the camera right now. It only shows: nothing at the site can be changed from it.
- It opens in a browser, or inside another page, such as your operators' console.
- No account, no app, nothing to install.
- It expires by itself, after 1 hour to 7 days.
Before it reaches you
A second look, before your operator's first.
With the optional AI check in Filter mode, burglary alarms from panel zones, camera emails and wired inputs wait while Kalytera Cloud looks at their cameras for people or vehicles. Somebody there: the alarm reaches you at once. Every camera checked and nobody seen: it reaches you marked AI filtered, a code of its own that can be turned off. Email, push and the site's outputs do not wait.
Never longer than the wait that is set
The portal's administrator sets the maximum wait, from 5 to 60 seconds. When it runs out, the alarm is sent.
As sure as the site needs
A minimum confidence from 20% to 80%, set in the portal, decides what counts as a person or a vehicle. Lower finds more; higher filters more.
Signaling
Your codes. Your receiver.
Event codes
In the portal, one card sets, for every site, the SIA code of each event Kalytera Cloud sends you, and whether it is sent at all.
Image faults
With the image checks add-on, view blocked, camera moved, out of focus and image frozen can reach you too, each with its restore. They are off until they are turned on in the portal.
A test is a test
Where the plan sends panel alarms to you, a panel's test alarm can go as a test signal, never as a burglary.
Your own software
Your software can ask for a video link through the API and, with the AI check add-on, for the check of its cameras.
Test the signaling from both ends with DC-09 Studio Send alarms to an alarm receiving centre
A portal for the center itself
Kalytera Monitoring
Kalytera Monitoring is the Kalytera Cloud configuration for an alarm receiving center (ARC): a portal for the operators with their subscribers' cameras and their panels' alarms in one portal.
- Alarm receiving: receives SIA DC-09 alarms from panels and communicators and matches them to their site.
- Video verification: live view, clips and snapshots from the site's cameras to verify each alarm.
- Forwarding: delivery of alarms to another receiver or ARC software over SIA DC-09.
- Rules and automation: system alarm rules and alarm automation included; Kalytera Bridge Agent and site input and output control on request.
Stop guessing at 03:12
Tell us which receiver you run and how many of your subscribers have cameras. We'll plan a pilot with a few of them.